聯 係 人：張經理
Discussion on the principle of passenger elevator selection and purchase
The principle of passenger elevator selection is mainly to the customers of the hotel and office building for the passenger elevator.
So how does the passenger elevator choose the elevator in the end?
First of all, we must determine the locations of the building, the next is to determine the flow of people, three is to consider the waiting time, the four is to determine the speed and load of the elevator in Guizhou,
Lift the most high-end choice is made in 30 seconds to reach the top; in the high-end building did reach the top in 40 seconds; mid-range building straight to reach the top in 45 seconds. In this way, you can use the height of your building by speed to choose the speed.
The next is the determination of the flow of human beings. Generally speaking, office buildings have large traffic volume. Therefore, elevators need to be considered from group control. From the comprehensive consideration of elevator quantity and speed to meet the needs, hotels usually use the way of combination of parallel and group control, so we also need to consider the number of rooms and star standards of hotels. In the low and middle level, the following three three - star level in parallel basically meet the needs of two parallel.
As the office building and the hotel are operating in nature, it is necessary to choose the elevator products from energy saving and safety.
The passenger elevator in front of us can meet the requirement of 2.5M/S by using the energy-saving electric passenger elevator. That is to say, if a high-grade office building is below 90 meters, it will be enough. And the hotel also can meet the requirements of the four star hotel under 15 layers. The energy saving elevator is very important for the running management company, which can save 1/3 of the power consumption than the ordinary elevator.
Because passenger elevator is no more than elevator for housing, all decorations are required. Generally, the car adopts etched stainless steel, or 1.2M can be decorated differently from above. The first floor standard of the door is French stainless steel, so the first floor of the passenger elevator should be well matched with the car upholstery. It is the choice of most customers that the passenger elevator is widely used in the form of door cover.
In security, it is necessary to consider whether it meets the requirements of two-way safety, and the second is the form of buffer, and the third is how to first aid after power failure.